Powerline dimmer actuator 1-10V. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. To switch and/or dim via a 1-10V interface. 1 NO non-floating contact 600VA. Standby loss only 0,5 watt. To activate and dim at different places. Current sink of max. 30mA for active and passive electronic ballasts. A Powerline sensor input is required for activation. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which has no function here. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².
* Recommended retail price plus VAT.