Wireless light actuator 10A/250V AC. Impulse switch with NO contact, not potential free. 230V LED lamps and ESL up to 200W, 230V incandescent lamps and halogen lamps 1000W. Standby loss only 0.4 watt. For installation. 49x51mm wide, 20mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. The convenient tap technology permits the teach-in of up to 32 wireless universal pushbuttons, wireless direction pushbuttons, wireless central control pushbuttons and motion sensors. Bidirectional wireless switchable. Zero passage switching. Supply voltage, switching voltage and control voltage local 230V. If supply voltage fails, the device is switched off in defined mode. When the supply voltage is restored, the device is switched off in a defined process. After installation, wait for the short automatic synchronisation before connecting the switched user to the network. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional 230V pushbutton or switch if fitted previously. Glow lamp current is not permitted.
* Recommended retail price plus VAT.