Wireless temperature controller with hand wheel for single mounting 84x84x27mm or mounting into the E-Design65 switching system. With battery (lifetime 4 years). Smart Home sensor. The temperature controller can be taught-in into the relay actuator TF61R or the heating cooling actuator FHK and into the GFVS software. At a setpoint change from min. 0,15°C, the temperature controller sends a wireless telegram within 60 seconds. If there is no change, a status message is sent every 5 minutes. A jumper defines the function mode. In the mode FHK the measured and set temperature are sent. Measurement accuracy is approx. 1°C. The day reference temperature that ranges from +12°C to +28°C is changed using the hand wheel. In the position the temperature contoll is off and the frost protection function activated. A day/night slide switch, like at the FTR65HS, is not present. We recommend stainless-steel countersunk screws 2.9x25mm, DIN 7982 C, for screw connections. Both with rawl plugs 5x25mm and with 55mm switch boxes. Set of 2 stainless-steel countersunk screws 2,9x25mm and plugs 5x25mm are enclosed. The wireless sensor can be taught in the actuators listed below and in the Wireless Building Visualisation and Control Software: FAE14, FHK14, F4HK14, F2L14, FHK61, FME14, TF61R.
* Recommended retail price plus VAT.