Telegram duplicator for the Eltako RS485 bus with exchangeable antenna. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The telegrams of taught-in IDs are duplicated and directly sent into the Eltako wireless network with a new output ID. These wireless telegrams can be specifically taught-in in decentralized actuators. A total of 120 memory locations are available. The upper rotary switch is used to selectively transmitting a wireless telegram. In normal operation, it is set to RUN. The bottom rotary switch is used for teaching-in and deleting IDs. In normal operation, it is set to RUN. The red LED below the upper rotary switch performs during the teaching-in process. The green LED below the lower rotary switch lights up briefly when a wireless telegram is transmitted. The enclosed small antenna can be replaced with a wireless antenna FAG55E- or FA250 with magnetic base and cable.
* Recommended retail price plus VAT.