Wireless 1-way flat pushbutton pure white glossy for single mounting 84x84x11mm or mounting into the E-Design65 switching system. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. Smart Home sensor. The scope of supply comprises the flat frame RF1E, a rocker, an attachment frame, a mounting base, the wireless module and one adhesive foil. Wireless flat pushbuttons with one rocker can send an analysable signal. Press the bottom of the rocker near the mark. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. Before screwing on the device, remove the rocker and remove the frame from the mounting plate. Then screw on the mounting base – with the ‚top‘ marking pointing upwards. Snap the frame and rocker back in.