Wireless 4-way flat pushbutton pure white glossy for single mounting 84x84x11mm or mounting into the E-Design65 switching system. Whisper quiet and with battery (lifetime 5-8 years). With rocker and double rocker. Smart Home sensor. The scope of supply comprises a mounting base with snapped-on electronics, a flat frame RF1E, a rocker and a double rocker. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. Wireless pushbuttons with double rocker can transmit four evaluable signals: press two rockers up or down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. Snap the large rocker so that the markings 0 and I on the back line up with the same markings on the wireless module. Installation only on a level surface: Screw on or glue mounting plate. First snap on the electronics, then the frame and remove the battery insulator. When you fit the rocker, the 0 mark on the rear must always be on top. The electronics integrated in the wireless pushbutton can be taught-in encrypted as described in the operating instructions in all encryptable actuators of the Series 61 and Series 71 as well as the FAM14.