Power input for 230V actuators. Modular device for DIN-EN 60715 TH35 rail mounting. Cross wiring bus and power supply via jumper. The power input STE14 is connected to the 230V power supply for the actuators on the upper input side. A busbar SAS- is plugged and screwed to the lower output side. The number of pitch units results from the sum of 1 PU for each STE14 and FAE14 device plus 2 PUs for the FAM14. The STE14 can be mounted left, right or between the actuators. With 24V actuators, an STE14 is not required since the busbar here connects the 24V output of the switch mode power supply unit to the power supply for the actuators. A connection with the bus and the 12V power supply does not take place. They will only be looped with the jumper.
* Recommended retail price plus VAT.